Using The Barcode Scanner - Matco Tools MBT2415 Instruction Manual

To save results, click on
shown below.
The document will
be saved in this
folder in drive C.
Type in here to
create your
own file name
Erase All the Stored Results in the Memory
This function allows you to erase off all the results stored in its memory and start a fresh new list after you have
backed up all the stored results to the PC. To access this function, select
show (Fig.95) as shown below:
Fig.94
Erase Results
from Memory.
1. Press and hold  and  keys together. A few seconds later the display will change to (Fig.96) as shown below
and that completes the process.
Warning: Performing the above procedures will erase all records from the tester.

Using The Barcode Scanner

Insert the cable to the Barcode Scanner, then plug the cable into into the tester. Aim the scanner at the barcode,
press the trigger to scan a barcode. See page 7 topic New: Key-in Particulars for additional information.
tab. A message box (see below) will appear. Create a file name and then click [Save] as

Fig.96
Left Click to Save
and press
367061WS2337E
SZC3466MZ
MR. KINGSLEY
CAL2115EM
Fig.95
key, the display will
33
1812411-11