Installation In Vertical Sliding Windows - Hisense AP0819CR1W Use And Installation Instructions

NOTE:The window installation kit can be used with vertical sliding windows between 18'' and 50'' wide.
Foam seal M
(Adhesive type-shorter)
Cut the foam seal L(adhesive type) & M
(adhesive type-shorter)to the proper length,and
attcah it to the window sash and frame.
Cut the foam seal A(Non-adhesive type) to the
window width. Stuff the foam seal A between the
glass and the window to prevent air and foreign
objects from getting into the room.
5
Insert the window exhaust adapter into the opening
in the vent panel.

Installation In Vertical Sliding Windows

Foam seal L
(Adhesive type)
A
Insert the vent panel assembly, including extension
panels, if needed, into the window opening. Extend
the extension panels to the window width.
screw F
Install the Window-lock bracket with a type F
screw as shown if you need.
8
Window-lock Bracket