Specifications - Sony RCD-W3 Operating Instructions Manual

Specifications

DECK A (the CD player section)
System
Laser
Frequency response
Signal-to-noise ratio
Dynamic range
DECK B (the CD-R and CD-RW
recording section)
System
Laser
Playable discs
Recordable discs
Frequency response
Signal-to-noise ratio
Dynamic range
Inputs
ANALOG IN
(Phono jacks)
DIGITAL OPTICAL IN
(Square optical connector jack)
Outputs
ANALOG OUT
(Phono jacks)
OPTICAL DIGITAL OUT
(Square optical connector jack)
PHONES
(Phone jacks)
Sony Corporation
24
Compact disc and digital
audio system
Semiconductor laser ( =
780 nm)
Emission duration:
continuous
20 Hz – 20,000 Hz (±0.5
dB)
More than 100 dB
More than 95 dB
Compact disc digital audio
system
Semiconductor laser ( =
780 nm)
Emission duration:
continuous
CD, CD-R, CD-RW
CD-R, CD-RW (for music
use)
20 to 20,000 Hz ±0.5 dB
Over 100 dB during
playback
More than 95 dB during
playback
impedance 47 kilohms
Rated input 330 mVrms
Minimum input
125 mVrms
Optical wavelength
660 nm
Rated output 2 Vrms (at
50 kilohms)
Load impedance over
10 kilohms
Wavelength 660 nm
Output level -18 dBm
28 mW, 32 ohms
Printed in China
General
Power requirements
U.S.A. and Canada
Other countries
Power consumption
Dimensions (approx.) (w/h/d) incl. projecting parts
Mass (approx.)
Supplied accessories
Design and specifications are subject to change
without notice.
120 V AC, 60 Hz
110 – 240 V AC, 50/60
Hz
20 W
and control
430 108 368 mm
4.6 kg
See page 5.