Configuration Steps - KEYKING 6630KE Operation Manual

KEYKING GROUP

5.3 Configuration Steps

When you do configuration, need no give power supply to reader. The reader will get power from
USB of PC.
Before you connect the cable, please make sure you already take out the power supply for 6630
series reader.
1. Connecting:

Plug white connector of Downloader to J5 on the back of reader.

Connect 485+ of J5 to 485+ of IC-232, 485- of J5 to 485- of IC-232.

Regarding IC-232, please put DIP1, DIP2, DIP3, DIP4 are ON position, let it work under 38400Bps.

Give IC-232 converter power supply.

Plug the DB9 female connector of cable to Serial Port of PC.

Plug the DB9 female connector of cable to IC-232.
After connecting, the reader will work, and you will see the display information.
2. Configuring by 6630KX Reader Display Setting:

Choose a Serial Port, and Open it.

Type the Company Name (like:

Choose a kind of Keypad Mode, Visual or Mask.

Choose "Download current time" or not.

Click OK Button. You will see "Succeed to configure reader" message in the message box.

Done. You will see the changes.
Keyking Group Limited
33 Jabotinski St., Twin Tower 1, Ramat Gan, 52511,Israel
website: www.keyking.net
6630KE Keypads Reader Operation Manual (1.00)
Image #5-3 Diagram for IC-232
Keyking Group), and choose the position.
E-mail: info@keyking.net
Page
15