Table of Contents
Advertisement
KEYKING GROUP
4.
Plug the Green Connector: Plug the green connector to the reader socket.
5.
Set the JUMPER (Output mode): select W26 or W34 bits output of reader.
6.
Mount the reader body: Mount the reader body to the Electronic Box (Reader Back Box) using the
two screws which isф4, 30mm length.
7.
Put the top cover and face plate.
Keyking Group Limited
33 Jabotinski St., Twin Tower 1, Ramat Gan, 52511,Israel
website: www.keyking.net
6630KE Keypads Reader Operation Manual (1.00)
E-mail: info@keyking.net
Page
11
Advertisement
Table of Contents
