Removing & Installing Body Components; Battery - Honda MSX125A 2017 Owner's Manual

16 MSX125-32K26B100.book 50 ページ ２０１６年２月５日 金曜日 午前１１時１９分
Removing & Installing Body Components

Battery

Bolt
Battery holder
Negative terminal
❙
Removal
Make sure the ignition switch is off.
1. Remove the seat.
50
Positive
terminal
Battery
P. 51
2
2. Remove the battery holder by removing
the bolt.
3. Disconnect the negative
the battery.
4. Disconnect the positive
the battery.
5. Remove the battery taking care not to
drop the terminal nuts.
❙
Installation
Install the parts in the reverse order of
removal. Always connect the positive
terminal first. Make sure that bolts and nuts
are tight.
Make sure the clock information is correct
after the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead." P. 81
2
terminal from
-
terminal from
+
+
P. 23
2
P. 40
2