16 MSX125-32K26B100.book 51 ページ 2016年2月5日 金曜日 午前11時19分
Seat
Prongs
Stays
Removing & Installing Body Components
❙
Removal
1. Insert the ignition key into the seat lock.
2. Turn it clockwise, then pull the seat up
Seat
❙
Installation
1. Insert the prongs into the stays on the
2. Push forward and down on the rear of the
Ignition key
The seat locks automatically when closed.
Take care not to lock your ignition key under
the seat.
Seat lock
and backward.
frame.
seat until it locks in place.
Make sure that the seat is locked securely
in position to pull it up lightly.
u
Seat
51