Table of Contents
Advertisement
Bluetooth Operation
Through Bluetooth, connect the Soundbar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
you can listen to the audio files stored on the
device through your Soundbar speakers.
What you need
•
A Bluetooth device which supports
Bluetooth profile A2DP, AVRCP and with
Bluetooth version as 4.2 + EDR.
•
The maximum operational range between
the Soundbar and a Bluetooth device is
approximately 10 meters (30 feet).
1
Press the
button repeatedly on the unit
or press BT button on the remote control
to switch the Soundbar to Bluetooth
mode.
» The Soundbar's indicator blinks blue.
2
On the Bluetooth device, switch on
Bluetooth, search for and select PHILIPS
HTL3310 to start connection (see the
user manual of the Bluetooth device on
how to enable Bluetooth).
» During connection, the Soundbar's
indicator blinks blue.
3
Wait until you hear "Paired" voice prompt
from the Soundbar.
» If the successfully connected, the Blue
indicator will light up solidly.
4
Select and play audio files or music on
your Bluetooth device.
•
During play, if a call is coming, music
play is paused. Play resumes when the
call ends.
•
If your Bluetooth device supports
AVRCP profile, on the remote control
you can press
track, or press
play.
12
/
to skip to a
to pause/resume
5
To exit Bluetooth, select other source.
•
When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
•
The music streaming may be interrupted by obstacles
between the device and Soundbar, such as wall, metallic
casing that covers the device, or other devices nearby
that operate in the same frequency.
•
If you want to connect your Soundbar with another
Bluetooth device, press and hold BT/PAIR on the
remote control to disconnect the currently connected
Bluetooth device.
AUX / OPTICAL / HDMI
ARC Operation
Ensure that the unit is connected to the TV or
audio device.
1
Press the
button repeatedly on the
unit or press the AUX, OPTICAL, HDMI
ARC buttons on the remote to select the
desired mode.
2
Operate your audio device directly for
playback features.
3
Press the VOL +/– buttons to adjust the
volume to your desired level.
Tip
•
While in OPTICAL/HDMI ARC mode, if there's no
sound output from the unit and the status Indicator
flashes, you may need to activate PCM or Dolby Digital
Signal output on your source device (e.g. TV, DVD or
Blu-ray player).
Hide quick links:
Advertisement
Table of Contents
