Wall Mount; Usb Operation - Philips 3000 Series User Manual

USB Operation

Enjoy audio on a USB storage device, such as an
MP3 player and USB flash memory, etc.
1
Insert the USB device.
2
Press the button repeatedly on the unit
or press the USB button on the remote
control to select USB mode.
3
During playback:
Button Action
Start, pause or resume play.
/ Skip to the previous or next track.
Tips
•
The unit can support USB devices with up to 32 GB
of memory.
•
This unit can play MP3 / WAV / WMA.
•
Support a USB port: 5V , 500mA.

5 Wall mount

Note
•
Improper wall mounting may result in accident, injury or
damage. If you have any query, contact Consumer Care
in your country.
•
Before wall mounting, make sure the wall can support
the weight of your Soundbar.
•
Before wall mount, you need not remove the four
rubber feet at the bottom of the Soundbar, otherwise
the rubber feet cannot be fixed back.
Screw length/diameter
Depending on the type of wall mounting your
Soundbar, make sure that you use screws of a
suitable length and diameter.
3.5-4mm
> 25mm
See the illustration in the quick start guide on
how to wall mount the Soundbar.
1) Drill two holes on the wall.
2) Secure the dowels and screws in the holes.
3) Hang the Soundbar on the fastening screws.
4mm
13