ABB C13 User Manual page 24

User Interface
Choice in menu
Alarm power factor
Pulse output
Out on
Out off
Exit
When either Alarm power, Alarm voltage, Alarm current or Alarm factor has
been chosen, the following choices will be available.
Choice
Alarm level on
Alarm on delay
Alarm level off
Alarm off delay
Save
Exit
C13
User Manual
Output on display Explanation
 By choosing this option, the
alarm will be set regarding to
the measured power factor.
 By choosing this option, the
pulse output function will be ac-
tivated.
 By choosing this option, the
output will be set to static on.
 By choosing this option, the
output will be set to static off.
 Go back to the set menu.
Output on display Unit
 W/V/A/-
 seconds
 W/V/A/-
 seconds
 N/A
 N/A
20
Explanation
When the measured value
passes the set value, the
alarm will be triggered.
When the measured value
passes the set value and
remains for the set time,
the alarm will be triggered.
When the measured value
passes the set value, the
alarm will be cleared.
When the measured value
passes the set value and
remains for the set time,
the alarm will be cleared.
This option saves the
alarm settings.
Go back to the set menu
without saving. Use this
option to view the current
alarm settings.
2CMC486004M0201
Revision: A