Choice in menu
CRC Part 1
CRC Part 2
Error
Set menu
The set menu is used to set different options in the meter. The set menu is reached
by using the long press when located in the view menu. The following choices are
available in the set menu, see table below.
Choice in menu
Output
Exit
Set alarm menu
When choosing Exit, the menu will return to the view menu. When choosing Out-
put, the following choices will be available.
Choice in menu
Alarm power
Alarm voltage
Alarm voltage
Alarm voltage
Alarm current
Alarm current
Alarm current
2CMC486004M0201
Revision: A
Output on
No. of
display
digits
N/A
4
N/A
4
Er <numerical
4
value>
Output on display
Output on display Explanation
By choosing this option, the
VV
alarm will be set with regards to
the measured power.
By choosing this option, the
V
alarm will be set with regards to
the measured voltage on
Phase 1.
By choosing this option, the
V
alarm will be set with regards to
the measured voltage on
Phase 2.
By choosing this option, the
V
alarm will be set with regards to
the measured voltage on
Phase 3.
By choosing this option, the
A
alarm will be set with regards to
the measured current on Phase
1.
By choosing this option, the
A
alarm will be set with regards to
the measured current on Phase
2.
By choosing this option, the
A
alarm will be set with regards to
the measured current on Phase
3.
19
User Interface
No. of
Unit
Min.
decimals
value
N/A
N/A
0000
N/A
N/A
0000
N/A
N/A
N/A
Max. value
FFFF
FFFF
N/A
C13
User Manual