Adding A Recording To A Previously Recorded Message - Sony ICD-R100PC Operating Instructions (primary manual) Operating Instructions Manual

Adding a Recording to a Previously
Recorded Message
You can add a recording to the message being played back.
The added recording will be placed after the current message and counted
as a part of the message.
During playback
of Message 3
After adding
a recording
Built-in microphone
1
During playback, press zREC/STOP for more
than 1 second.
The REC indicator appears and "PLUS" flashes three
times on the display window.
The OPR indicator will turn red.
The new recording will be added at the end of the
current message.
2
Press zREC/STOP or xSTOP to stop the recording.
Note
The added message will be recorded in the same recording mode (SP or LP; see
page 35) as the original message, regardless of the current recording mode
setting.
Message 3
Message 3
Meeting at 2 o'clock
on December 1.
Message 4
Message 4
Added recording
at Conference
room A
OPR indicator
zREC/STOP
xSTOP
21
GB