BEditing Messages
Adding a Recording
Notes
• At a factory setting, you cannot add a recording not to erase the message by
accidental operation. See "Using an Adding Recording" (page 52) to change
the setting.
• The added or overwritten portion of a message will be recorded in the same
recording mode (ST, SP or LP; see page 54) as the original message, regardless
of the current recording mode setting.
• You cannot add or overwrite a recording if the remaining memory is not long
enough. For more information, see "Troubleshooting" (page 59).
Adding a Recording to a Previously Recorded Message
When REC-OP in the menu is set to ADD, you can add a recording to the
message being played back.
The added recording will be placed after the current message and counted
as a part of the message.
During playback
of Message 3
After adding
a recording
Message 3
Message 3
Added recording
Meeting at 2 o'clock
on December 1.
Built-in microphone
zREC/REC PAUSE
xSTOP
OPR indicator
Message 4
Message 4
at Conference
room A
Continued
35
GB