Erasing Messages - Sony ICD-R100PC Operating Instructions (primary manual) Operating Instructions Manual

Erasing Messages

You can erase the recorded messages one by one or all messages in a file at
a time.
Note that once a recording has been erased, you cannot retrieve it.
Erasing messages one by one
When a message is erased, the remaining messages will advance and
renumbered so that there will be no space between messages.
Message 1
Before erasing
After erasing
Message 1 Message 2 Message 3 Message 4
To cancel erasing
Press xSTOP before step 2.
18
GB
Message 2 Message 3
Erase Message 3
Remaining messages are renumbered.
1 Press ERASE while playing back
the message you want to erase
or press ERASE for more than 1
second during stop mode.
A beep will sound and the message
number and "ERASE" will flash
while the first and last 5 seconds of
the message is played back 10
times.
2 Press ERASE while the message is
being played back.
The message is erased and the
remaining messages will be
renumbered. (For example, if you
erase Message 3, Message 4 will be
renumbered as Message 3. When
erasing is completed, the unit will
stop at the beginning of the
following message.)
Message 4 Message 5