Operating Manual - Cherry MW 8 ADVANCED Operation Manual

OPERATING MANUAL

CHERRY MW 8 ADVANCED – Wireless Mouse with Bluetooth
1 Before you begin ...
Every device is different!
EN
The operating instructions contain
information on effective and reliable
use.
• Read the operating instructions carefully.
• Keep the operating instructions and pass them
on to other users.
The CHERRY MW 8 ADVANCED is a wireless mouse
for operating PCs and laptops.
It is characterized by the following features:
• Switchable transmission via Bluetooth (4.0) or
wireless (2.4 GHz)
• Optical laser sensor that even works on glass
surfaces
• Adjustable resolution for precise work via the
DPI switch on the top of the mouse (600/1000/
1600/3200 dpi)
• In-built lithium ion battery for charging via USB
cable during operation
For information on other products, downloads and
much more, visit us at www.cherry.de.
8
®
and RF Transmission
2 General safety
instructions
WARNING: Risk of choking from
swallowing small parts
• Keep the device out of the reach of children
under 3 years.
NOTICE: The magnet in the mouse can
wipe storage media and damage
mechanical watches
On the bottom of the mouse there is a magnet for
holding its receiver.
• Do not put any storage media such as SD cards
or external hard drives, or mechanical watches
near the mouse.
3 Connecting the mouse
with a PC/laptop
Battery charge status
The battery in the mouse is already
charged. You can use the mouse
immediately.
• Before first use, however, we recommend that
you charge the mouse fully with the cable
supplied (see 5 "Charging the mouse").
You can connect the mouse to the PC/laptop via
Bluetooth or with the receiver using a 2.4 GHz
wireless connection.
The Bluetooth connection is convenient if you wish
to use the mouse with several devices: You only
need to make the connection once and do not
require the receiver.
Parallel login to multiple PCs / laptops
Bluetooth automatically detects if a PC
or laptop that has already been
connected to the device is switched on. In this
case, Bluetooth does not allow a new connection
with any other PC or laptop, thus preventing
inadvertent entries.
• Turn off the first PC/laptop or disable the
connections.
If your PC/laptop does not have Bluetooth or if you
don't want to make any settings, you can connect
the mouse with the PC/laptop via the receiver.
3.1 Connecting the mouse via
Bluetooth
If the mouse is already connected to another
device, you cannot make a parallel connection.
Switch off the first device or deactivate the
connection.
1 Start the search for Bluetooth devices on your
PC/laptop (for example by calling up Start >
Settings > Devices > Bluetooth).