Leg Assembly; Fluids; Mixing Blood Powder - Simulaids SMART STAT BASIC 8002 Instruction And Care Manual

Leg Assembly:

1. Connect the matching colored wires and tubing
2. Check all the connectors to ensure they are securely seated, so the wires do not separate
3. Push the excess wiring into the thigh, as not to encumber the knee joint
4. Secure with the knee pin
Right Thigh Connectors
The black cord connects to the transformer power block.
The USB connection is to link to an external computer.
The category 5 cable can be used to connect to a router to make a Wi-Fi link.

Fluids:

Ink and fake blood products will permanently stain and cannot be removed.
Mixing Blood Powder: Included with the simulator is an initial supply of blood powder; mix it
according to the instructions printed on the bag. Left over blood can be stored in a refrigerator
for up to two weeks.
6