Cpr - Simulaids SMART STAT BASIC 8002 Instruction And Care Manual

Heart: This programming contains 17 rhythms with rate variation, selection of running rhythm,
and the opportunity to select a waiting rhythm to convert to after defibrillation. Install your
choice of defibrillation adapters in the defibrillation sites on the chest. You may need to order a
training cable to effectively use your hands free defib capability. You can then choose to
convert or not to convert with the touch of the SS Basic screen. You can also pace by setting
the level of capture on the appropriate SS Basic screen. Once the capture level has been set,
the simulator's rhythm will be adjusted to coincide with the operation of the pacing feature on
your monitor/ defibrillator.
You may also set the choice of heart sounds. There are 4 sites to auscultate. There are 4
normal, systolic murmur, diastolic murmur, and friction rub.
choices: As in the human condition,
the sounds are specific to the locations where you hear these anomalies, i.e., you will not hear
the murmurs in the apex location. Refer to the accompanying chart for the locations of the
sites. The amplitude of the heart sounds may also be varied to four levels.
PEA PEA
An additional feature is the button. Tapping the button will cease all pulses during any
rhythm.
IM injection sites are located on the deltoid and vastus lateralis (right side only) muscle
groups. Medication lists (page 38) are established on the iPad to track the practitioner's
injections. You can update or alter this list on the iPad Medications list.
CPR activities are shown on the student recording by two entries keyed in the Event log by the
instructor during a student session. These entries are CPR Start and CPR Stop. There is no
recording feature in this simulator. Proper compressions are rewarded with ECG artifact and
carotid pulses. Ventilations via BVM will be evaluated on the chest rise associated with adequate
seal and application of the BVM.
31