Ribbon Lift Adjustments; Transfer Wheel Adjustment; Transfer Wheel Bellcrank Adjustment - IBM C-1 Customer Engineering Reference Manual

MODEL Cl
CUSTOMER ENGINEERING
adjust the left gear for maximum engagement with-
out binding. Care must be taken to insure that only (
one of set gears is engaged at a given time.
Figure 46. Transfer Wheel AdjuJlmenl
19. TRANSFER WHEEL. With the rewind lever
latched down adjust the transfer wheel. by position-
ing its mounting. so it clears the d!"ive wheel by
¥.i2"
(Figure 46).
20. TRANSFER WHEEL BELLCRANK. With the
rewind lever latched position the bellcrank-eccentric
mounting-stud so that the transfer wheel clears the
flange on the power roll pulley by
¥.!2"
(Figure 46).
NOTE: Adjustments 19 and 20 should be considered
together to insure that the transfer wheel contacts
the drive-shaft wheel and the flange on the power-
roll pulley when the rewind lever is
nil
from its
latched position.
Ribbon Lift Adjustments
Refer to Model Bl. Ribbon Lift, Adjustments 1
f
through 5. (
48
\