Table of Contents
Advertisement
MODEL Cl
CUSTOMER ENGINEERING.
Figure
13.
Line Lock
Adjustment
PUSH ROD. Refer to Model Bl, Line Lock, Adjust-
ment 2.
CARRIAGE AND RAILS
The carriage has retained its box-frame construc-
tion and operational characteristics.
The following
changes have been made to conform to the new case
and cover section design and to increase machine
flexibility.
Model C carriages are available in the following
lengths: 13", 17", 20", 24" and 30". The margin and
tab-rack center-support, on carriages 17" and longer,
anchors to the carriage and bridges up and over the
margin rack where it is attached at the rear ( Figure
14).
It
mounts into the tab rack as before. This al-
lows the operator to position either margin stop at
llny desired location on any length carriage.
18
Advertisement
Table of Contents
