CAHORS Digital STM 17 HD User Manual page 8

Pwr:

 None:
port in the list.
Fixed:

5.2.1 USALS Setting:
Press [OK] to enter USALS SETUP menu on Position Type if
the type sets to USALS parameters
042.0°E Turksat3/4A: The current satellite. Press [/] to switch between satellites

button to select the focused satellite and press [MENU] to exit
from edit menu. All the other parameters on the menu will be
according to the selected satellite.
 My Longitude:
Press [OK] again to exit edit mode
 My Latitude:
Press [OK] again to exit edit mode
Move to center:

Move to position:

5.2.2 Diseqc 1.2 Setting:
Press [OK] to enter Diseqc 1.2 setting menu on Position Type
if the type sets to Diseqc 1.2
Move single step:

Move incessantly:

CAHORS Digital – CS 60022
46003 Cahors Cedex 9 – FRANCE
www.groupe-cahors.com
User`s Manual
The power parameter of the LNB. Press [/] button to
switch between Auto, Off, 13v and 18v.
The Diseqc port setting for Diseqc 1.0 and 1.1. Press [/]
button to switch between ports or press [OK] button to select
Set the motor type. Press [/] to switch between Fixed,
USALS and Diseqc 1.2.
and press [OK] to enter satellite list to select satellite. Press [OK]
The longitude of local. Press [OK] to enter edit mode, then
press [/] to change the value and [/] to move curse.
The latitude of local. Press [OK] to enter edit mode, then
press [/] to change the value and [/] to move curse.
Press [OK] to move the dish to central position.
Press [OK] to confirm to move to setting position
Move the motor by step. Press [/] to move to west or east
Move the motor incessantly. Press [/] to move to west or
east
7/19
refreshed