Spectrum Chart; Constellation - CAHORS Digital STM 17 HD User Manual

5.4. S C
PECTRUM HART
This menu will show the spectrum chart of setting frequency range
on current cable line. Press [/] to switch curser focus between
Start Frequency, LNB Type, End Frequency, LNB Power/22K and
Current Frequency Mark.
--K:

22k: 22k on
--V:

 40~70~100: The range of power level. And the range is 0 ~ 100

:
03500:

mark:

04000:

 cur:
 05150:
Press [/] to switch between LNB types.
Press [OK] button to check whether the current frequency can be
locked or not. A dialog will show the locked transponder once it
locks.
5.5. C
ONSTELLATION
Move the curse to Constellation icon and press OK to select
satellite and transponder for constellation analyzer. See the figure
below:
042.0°E Turksat3/4A: The current satellite. Press [/] to switch between

Press [OK] button to select the focused satellite and press
[MENU] to exit from edit menu. All the other parameters on
menu will be refreshed according to the selected satellite.
11096/H/30000:

CAHORS Digital – CS 60022
46003 Cahors Cedex 9 – FRANCE
www.groupe-cahors.com
User`s Manual
Show the 22k status. -–K: 22k off;
Show the RF power output status. The values are: 13V, 18V and OFF(--V)
The current frequency curse, press [/] to set the current frequency.
The start frequency of the spectrum chart. Press [OK] to edit it.
The power level value of current frequency
The end frequency of the spectrum chart. Press [OK] to edit it.
The current frequency
The current LNB type mode.
satellites and press [OK] to enter satellite list to select satellite.
The current transponder, press [/] to switch between
transponders
9/19
the