Download Print this page

Honeywell SLATE R8001U3001 Installation Instructions Manual page 8

Analog i/o module

Advertisement

2. This digital apparatus does not exceed the Class A limits for
radio noise, set out in the Radio Interfeence Regulations of
the Canadian Department of Communications.
3. Cable shield must be terminated to ground at both ends. If
shielded cable is NOT used, use three-wire twisted cable.
Wiring
WARNING
Electrical Shock Hazard.
Can cause severe injury, death, or equipment
damage.
Disconnect the power supply from the main disconnect
before beginning installation to prevent electrical shock
and equipment damage. More than one disconnect can
be required.
8
32-00009—01

Advertisement

loading