Advertisement
Signal ground
Note the 18V system ground is not electrically connected to earth
ground. Follow local codes and appliance recommendations to
determine if this should be connected to earth ground.
Be sure loads do not exceed the terminal ratings. Refer to the
labels or terminal ratings in Table 3.
The SLATE system must be mounted in an electrical enclosure.
When mounting in an electrical enclosure, provide adequate
clearance for servicing, installation and removal of SLATE
modules.
The maximum leadwire length is 300 feet to terminal inputs
(Control, Running/Lockout Interlock)
SLATE
ANALOG I/O MODULE
15
™
R8001U3001
Advertisement
