Advertisement
Fig. 2.
Installing the Analog I/O Module on the Sub-Base Module.
2. Wiring must comply with all applicable codes, ordinances and
regulations.
3. Wiring must comply with NEC Class 1 (Line Voltage) wiring.
IMPORTANT
1. This equipment generates, uses and can radiate
radiofrequency energy and, if not installed and used in
accordance with these instructions, may cause interference
for radio communications. It has been tested and found to
comply with the limits of a Class A computing device of part
15 of FCC rules, which are designed to provide reasonable
protection against such interference when operated in a
commercial environment. Operation of this equipment in a
residential area may cause interference; in which case, the
user, at their own expense, may be required to take whatever
measures are required to correct this interference.
SLATE
ANALOG I/O MODULE
™
R8001U3001
M35383
7
Advertisement
