Supermicro AOC-MHIBF-m2Q2G User Manual page 34

AOC-MHIBF-m2Q2G/m1Q2G Add-on Card User's Guide
3. To check whether the add-on card is set to Ethernet or InfiniBand mode and
to verify if the LAN ports are active or not, run the following command:
Ibv_devinfo
[root@localhost ~]# ibv_devinfo
hca_id: mlx4_0
transport:
fw_ver:
node_guid:
sys_image_guid:
vendor_id:
vendor_part_id:
hw_ver:
board_id:
phys_port_cnt:
Device ports:
[root@localhost ~]#_
port: 1
state:
max_mtu:
active_mtu:
sm_lid:
port_lid:
port_lmc:
link_layer:
port: 2
state:
max_mtu:
active_mtu:
sm_lid:
port_lid:
port_lmc:
link_layer:
3-12
InfiniBand (0)
2.42.5000
0030:48ff:ffff:eb54
0030:48ff:ffff:eb57
0x02c9
4103
0x0
SM_1171000001000
2
PORT_DOWN (1)
4096 (5)
4096 (5)
0
0
0x00
InfiniBand
PORT_DOWN (1)
4096 (5)
4096 (5)
0
0
0x00
InfiniBand