Supermicro AOC-MHIBF-m2Q2G User Manual page 25

4. Secure the add-on card to the chassis. If required, use the screws that you
previously removed.
5. Attach any necessary external cables to the add-on card.
6. Replace the system cover.
7. Plug in the power cord and power up the system.
Follow this step to install the add-on card if your system does not support a swap-
pable bracket. Insert the SIOM card in the motherboard and then install the moth-
erboard in the chassis. An internal bracket comes with the SIOM card 1U chassis
SKU. It needs to be installed onto the chassis.
Note: Supermicro recommends that this SIOIM card be installed by a
system integrator or by the manufacturer.
Insert the SIOM card
into the motherboard
Install the bracket
onto the chassis
Install the motherboard
in the chassis
3-3
Chapter 3: Installation
1
2
Tighten the screw
3
4