Sony Atrac3/MP3 CD Walkman D-NE520 Operating Instructions Manual page 27

Items
Options (: Default settings)
POWER SAVE
 OFF
(The OPERATION
lamp on the
player)
1)
PLAY ORDER
TRACK
(Playback order)
1)
GROUP
 OFF
CD-EXTRA
1) 4)
(Playback by disc
format)
1) You can set this up only while the player is stopped.
2) AVLS is an abbreviation of the Automatic Volume Limiter System.
3) This function works only for ATRAC CDs.
4) This function works only for audio CDs and CD-Extra CDs.
Notes
• Even if "G-PROTECTION" is set to "2", sound may skip:
– when the CD player receives stronger continuous shock than expected,
– when a dirty or scratched CD is played, or
– for CD-Rs/CD-RWs, when a poor-quality disc is played or there is a problem with the original recording
device or application software.
• Even if "SEAMLESS" is set to "ON", the tracks may not play continuously depending on how the source
music was recorded.
On the CD player, the display lights up for about 10 seconds,
then turns off. The OPERATION lamp on the player remains lit.
1 On the CD player, the display does not light up.
2 On the CD player, the display does not light up. Furthermore,
the SOUND settings are not effective.
 NORMAL
ID3tagTNO
FILE NAME
 OFF
ON
Set to "OFF" as long as you can play your CD normally.
ON If you cannot play your CD-Extra, set to "ON." You may play it.
Play back the music source in the order of
recording.
Play back in the order of ID3 tag number.
Play back in the alphabetical order of the
file names.
Play back the music source in the order of
recording.
Play back the music source in the order of
group names.
27