When using the Sony alkaline battery LR6
(SG) (produced in Japan)
1)Measured value using the JEITA standard (Japan
Electronics and Information Technology Industries
Playing time shown is approximate hours, when
you use the player on a ﬂat and stable surface and
"POWER SAVE" is set to "2" ( page 27). This
value varies depending on how the player is used.
2)Charging time varies depending on how the
rechargeable battery is used.
3)Recorded at 48 kbps
4)Recorded at 128 kbps
Notes on rechargeable batteries and dry
• Do not charge dry batteries.
• Do not throw the batteries into a ﬁre.
• Do not carry batteries in a pocket, etc. with coins
or other metallic objects. The battery can generate
heat if its positive and negative terminals are
accidentally allowed to come into contact with a
• When the batteries are not to be used for a long
time, remove them.
• If battery leakage occurs, wipe off any deposit
left in the battery compartment, and install new
batteries. If the deposit adheres to your skin, wash
it off thoroughly.
When using the AC power
You can use the player powered by the AC
power adaptor without batteries.
to an AC outlet
AC power adaptor
to DC IN 3V
Connect the AC power adaptor to
the DC IN 3V jack of your CD player
and an AC outlet.
Make sure that the OPERATION lamp
ﬂashes, then lights up.
Notes on the AC power adaptor
• Disconnect all power sources when the player is
not to be used for a long time.
• Use only the AC power adaptor supplied. If
your player is not supplied with the one, use an
AC-E30HG AC power adaptor (not available in
Australia). If you use any other AC power adaptor,
malfunction may occur.
• Do not touch the AC power adaptor with wet
• Connect the AC power adaptor to an easily
accessible AC outlet. Should you notice an
abnormality in the AC power adaptor, disconnect it
from the AC outlet immediately.
Polarity of the plug