Appareo Stratus ESG Installation Manual

Portable receiver connector plate

Hide thumbs Also See for Stratus ESG:

Stratus ESG to Portable Receiver

Connector Plate

Installation Guide

Revision 1.2

Disclaimer

This document and its contents are not certified. Installation of this system in a certified aircraft

will require additional approval.

Table of Contents

Do you have a question about the Stratus ESG and is the answer not in the manual?

Page 1 Stratus ESG to Portable Receiver Connector Plate Installation Guide Revision 1.2 Disclaimer This document and its contents are not certified. Installation of this system in a certified aircraft will require additional approval.
Page 2 Unauthorized replication of this guide is prohibited. Appareo, Appareo Systems, Stratus ESG, and the Appareo and Stratus ESG logos are either registered trademarks or trademarks of Appareo Systems, LLC. All other trademarks and registered trademarks are the sole property of their respective owners.
Page 3 Last Revised: April 27, 2016 Installing the connector plate This document is intended to help you determine the best method for installing the Stratus ESG connector plate in an aircraft and connecting it to a portable ADS-B In receiver. Supplied Components...
Page 4 Stratus ESG to Portable Receiver Connector Plate Installation Guide Revision 1.2 Last Revised: April 27, 2016 3. Wire the connector plate from the transponder to the connector plate following the wiring diagram on the next page and using the cabling specified under “Additional Components”...
Page 5 Stratus ESG to Portable Receiver Connector Plate Installation Guide Revision 1.2 Last Revised: April 27, 2016 Stratus ESG to Stratus Portable Wiring Diagram STRATUS ESG P1001 P1001 – ESG 37-DSUB AIRCRAFT POWER 1 11-33 VDC AIRCRAFT POWER AIRCRAFT POWER 2...