On The Remote Control - Sony WALKMAN MZ-R50 Operating Instructions Manual

In stop mode
A
Elapsed time
Remaining time for
recording
Remaining time
after the current
location
Current time 2)
1)
Appears only if the track has been labeled.
2) Appears only when the clock is set.

On the remote control

1
Press DISPLAY while recording or in
stop mode. Each time you press the
button, the display changes as
follows.
A B
While recording
A
Track number
Track number
—
1)
Appears only when the clock is set.
B
Track number
Track name 1)
1)
Disc name
2)
Current date
DISPLAY
B
Elapsed time
Remaining time
for recording
1)
Current time
In stop mode
A
Track number
Track number
Number of tracks
in the disc
—
1) Appears only if the track has been labeled.
2)
Appears only when the clock is set.
To know the recording condition
The REC indicator lights up or flashes
according to the recording condition.
Recording
condition
While recording
Recording standby
Less than 3 minutes'
recording time
available
A track mark has
been added
z
If you want to check the playing position or
track name while playing, see page 19.
B
Elapsed time
1)
Track name
Disc name 1)
Current time 2)
REC indicator
lights up
flashes according to
the loudness of the
source while
recording with a
microphone (voice
mirror)
flashes
flashes slowly
goes off
momentarily
15
-EN