Table of Contents
Advertisement
Chapter Objectives
Mounting the KRF
Installing and Connecting the 1771 KRF
In this chapter, you learn how to:
mount the KRF
connect the KRF to a DH, DH+, or remote I/O module
connect the KRF to the broadband network
power up the KRF
troubleshoot the KRF
To mount the KRF in an Allen-Bradley 1771 I/O chassis, follow the
instructions below:
1.
Perform a power down of the I/O chassis and its controlling PLC
(refer to your PLC User's Manual for more information).
WARNING: Remove power from the I/O chassis backplane
before removing or installing an I/O module. Failure to remove
power from the backplane could cause injury or equipment
damage due to possible unexpected operation.
2.
Slide the KRF into one of the slots in the I/O chassis and secure the
latch on top of the module.
The next section tells you how to connect the KRF to DH/DH+ or remote
I/O modules.
4
Chapter
4 1
Advertisement
Table of Contents
