Selecting The Disc Mode (Disc Mode); Adjusting The Contrast Of The Display Window (Contrast Adjustment) - Sony MZ-NH600D Operating Instructions Manual

Selecting the disc
mode (Disc Mode)
When you insert a 60/74/80-minute
standard disc (blank) into the player, you
can use this function to specify use of the
disc in Hi-MD mode or MD mode.
You must set "Disc Mode" in the menu to
"MD" when recording or transferring
audio data from your computer if you
want to use the disc on another
component that does not support Hi-MD.
5-way control key (NENT)
NAVI/MENU
1
Enter the menu and select "Option" -
"Disc Mode".
2
Turn the jog dial until "Hi-MD"
(factory setting) or "MD" appears in
the display, and then press NENT to
enter the selection.
Notes
•
Even if you select "MD" as the "Disc Mode"
setting, the operation mode can only be "Hi-
MD" when using a 1GB Hi-MD disc.
•
The operation mode set in the "Disc Mode"
menu is applied to a blank 60/74/80-minute
standard disc used on the player even if a
different operation mode was selected in the
SonicStage software or a different operation
mode appeared on the display after the disc
was formatted by the SonicStage software.
32
Jog dial
Adjusting the contrast
of the display window
(Contrast Adjustment)
You can adjust the contrast of the display
window.
5-way control key (NENT)
NAVI/MENU
1
While the player is stopped, enter the
menu and select "Option" -
"Contrast".
2
Turn the jog dial to adjust the
contrast, and then press NENT to
enter the selection.
Jog dial