Complete List Of User Differences Of Revisions А, В And B.01 For E20-10 Module - L-Card E20-10 User Manual

Measuring voltage converters
Table of Contents

Advertisement

2.1. Complete list of user differences of revisions А, В
and B.01 for E20-10 module
Since 2008 L-Card has decided to release E20-10 of revision В with advanced useful
quality.
All E20-10 modules of 2006 and 2007 production years should be related to revision А (see
label on the body bottom), since 2008 L-Card has started to produce E20-10 of revision В.
In 2013 L-Card has started to release revision B.01 with extended power voltage range.
Revisions B and B.01 are not differed in program. Revision B.01 specified on label on body bottom
face, new power voltage range "+8.0...+40 V" is specified on body top cover.
E20-10 module has signed in 2017 as modification in L-CARD Measuring voltage converter
series.
All consumer differences of E20-10 of revisions А and В are given in Table:
Characteristic, parameter, function,
property
Data calibration procedure...
5.2.5
(p.
)
Interframe delay range
(p.
5.2.1
)
Power consumption
7.4
(p.
)
Power supply voltage
ADC input offset current software
disconnecting capability (p.
Intrinsic input current of ADC analog
7.1
input (p.
)
Typical signal-to-noise ratio
7.1
(p.
)
Minimum data acquisition rate at
maximum interframe delay and ADC
conversion frequency of 1 MHz (p.
Input resistance of analog input
Inter-channel interference, not more
7.1
than (p.
):
- at constant voltage
- at frequency of 1 kHz
- at frequency of 1 MHz
Operating current of output of +5V of
external devices power supply
E20-10 revision А
is performed on computer
(by implementing of the
relevant library function)
0-255 ADC conversion
frequency periods
to 5 W
+9.0...+27 V
no
6.5.4.1
)
-15...0 µA (typical value -
7 µA)
70 dB
7.8 kbyte/s
7.1
)
min. 5 MOhm
-50 dB
-70 dB
-60 dB
35 mA
E20-10 of revisions B and B.01,
L-CARD-E20-10
is performed inside E20-10 by
FPGA hardware.
0-65535 ADC conversion frequency
periods
to 4.5 W
+9.0...+27 V (revision B)
+8.0...+40 V (revision B.01)
yes
10 nA (typical value), if input
current is not specially on
73 dB
30 byte/s
10 MOhm ± 5%
-70 dB
-75 dB
-65 dB
35 mA (revision B)
100 mA (revision B.01)

Advertisement

Table of Contents
loading

This manual is also suitable for:

E20-10-1E20-10-dE20-10-d-1-iE20-10-d-1E20-10-d-i

Table of Contents