Whale Gusher 10 Mk3 BP3708 Installation & User's Instructions

Whale Gusher 10 Mk3 BP3708 Installation & User's Instructions

Advertisement

Whale Gusher
INSTALLATION & USER INSTRUCTIONS
Thank you for purchasing this Whale® product.
For over 60 years Whale® has led the way in the design and manufacturer of water and waste systems
including:- plumbing, faucets, showers and pumps for low voltage applications. The company and its products have
built a reputation for quality, reliability and innovation backed up by excellent customer service.
For information on our full product range visit: www.whalepumps.com
CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
EU Declaration of Conformity
13.
14.
LIST OF IMAGES
Fig. 1
Through deck installation
Fig. 2
Incorrect installation
Fig. 3
Typical installation diagram
Fig. 4
Mounting arrangements for a standard model
Fig. 5
Dimensions
Fig. 6
Discharge point is well above the water line
Fig. 7
Deck fitting for Gusher Pumps (Half sectional elevation of deck fitting, pump and bracket)
Fig. 8
Exploded diagram
Read the following carefully before installation
To the Fitter:
Check that the product is suitable for the intended application. Follow these installation instructions and ensure all
relevant personnel read the points listed below. Also ensure that these operating instructions are passed on to the
end user. The manufacturer cannot be held responsible for claims arising from incorrect installation, unauthorised
modification or misuse of the product.
To the User:
Read the following instructions carefully.
10 Mk3 Pump
®
1
BP3708 / BP3740

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Gusher 10 Mk3 BP3708 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Whale Gusher 10 Mk3 BP3708

  • Page 1 Thank you for purchasing this Whale® product. For over 60 years Whale® has led the way in the design and manufacturer of water and waste systems including:- plumbing, faucets, showers and pumps for low voltage applications. The company and its products have built a reputation for quality, reliability and innovation backed up by excellent customer service.
  • Page 2 PRINCIPLES OF OPERATION This bilge pump is designed to exhaust standing water only. Manufactured from durable diecast alloy to withstand tough marine conditions. SPECIFICATION Thru Deck / Bulkhead Model On Deck / Bulkhead (includes deck plate) Product Code BP3708 BP3740 Hose Connections 38 mm (1 1/2”) Smooth Hose Connections Weight...
  • Page 3 Avoid sharp bends in pipework. • Fit a Whale strumbox / strainer part number SB4222 / SB5865 which prevents the end of the hose sucking against a flat surface and allows the water level to be reduced to a minimum.
  • Page 4 Fig. 5 Dimensions For Mounting On Deck/Bulkhead: Use pump as a template, mark off and drill four 1/4” (6mm) holes. Check flow direction and secure the pump with 1/4” (6mm) bolts. Attach 1 1/2” (38mm) smooth bore reinforced hose with stainless steel worm drive hose clips.
  • Page 5 Washer Fig. 8 Exploded diagram Annual Checks • Whale advise that the boat's plumbing system is checked annually for leaks and obstructions. Optimal Performance • Ensure this product is clear of debris It is recommended a service kit is kept on board. These are available from your local chandlery.
  • Page 6 Inspect and remove any debris. If damaged replace (see Service kits) outlet valve failure WINTERISING Note: Annually at the end of the season, fully drain all water in the pipework and pump chamber. Whale® cannot guarantee warranty if the system is not fully drained for winterising. SERVICE SUPPORT DETAILS Service kits available: AK3706 and AK3714 For installation or service advice please contact Whale®...
  • Page 8 Munster Simms Engineering Ltd. 2 Enterprise Road, Bangor, N. Ireland BT19 7TA Tel: +44 (0)28 9127 0531 whalepumps.com info@whalepumps.com Ref No: db_jw_G10_180.07_v3_0217...

This manual is also suitable for:

Gusher 10 mk3 bp3740

Table of Contents