Safety Precautions - BMPRO J35 Owner's Manual

SAFETY PRECAUTIONS

Please read the Safety Precautions before installing or using the J35 and ControlNode102. Be sure to
observe all precautions without fail. Failure to observe these instructions properly may result in personal
damage, or personal injury which depending on the circumstances may be serious and cause loss of life.
Correct installation is the most critical factor in ensuring the safe use of the J35 and ControlNode102. If
every consideration of these instructions has been satisfied, the J35 and ControlNode102 will be safe to
operate.
This product is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible for their safety.
Children shall not play with this product. Cleaning and user maintenance should not be performed by
unsupervised children.
Ensure that the product is well ventilated and that if the product has a fan, the fan is not covered or
obstructed.
Metal conducts electricity. Take care not to drop or touch metal objects onto the battery terminals, which if
contacts the battery terminals, could cause short circuits and may lead to serious personal injury. Take care
and remove unwanted metal objects from the vicinity of the battery and J35. Remove any personal metal
adornment such as chain, watch or ring before handling the battery and J35.
Do not replace a damaged mains power cord. If the power cord is damaged, the product must be discarded.
Batteries are always electrically live and must be treated with extreme caution. They can supply high short
circuit currents, even if they appear damaged or undamaged.
Before servicing a battery, disconnect the power supply from all power sources.
Only charge battery types which are supported by this charger (see "Compatible Battery Types")
Do not allow water or other liquids to enter the power supply area.
Do not drop or vigorously shake the product as this may cause damage. Do not shock the product, its
accessories or batteries as this may cause the product or battery to fail, catch fire or explode.
Stay away from magnetic equipment. Radiation may erase the information stored on this product causing it
to become inoperative.
Please note that your battery can only reach top performance level only after it has been fully charged and
discharged two or three times.
Electricity and water do not mix. Keep this product and your battery dry and do not expose it to water or
water vapour. Do not operate this product or battery near any sort of liquid. Do not operate this product with
wet hands..
Do not use this product in environments that are excessively hot, cold, dusty or humid or where it will be
exposed to magnetic fields or long periods of sunshine. Such exposure may cause the product or your
battery to fail, catch fire or explode.
Only use this product with the supplied power cable and with batteries or accessories recommended in this
manual. Use of other batteries or accessories not recommended in this manual may cause damage to the
unit and will void the warranty.
The J35 and ControlNode102 is a high precision electronic product. It contains no user-serviceable
parts inside. Do not try to dismantle, modify or repair it yourself. Disassembly, service or repair by an
unauthorised person will void the warranty.
Before using this product, check that cable connections to the battery are of correct polarity. To protect
against accidental short circuit, ensure that the shrouding supplied with the batteries are always fitted to the
battery terminals.
Consult caravan dealer or qualified personnel before servicing your battery.
Do not install this product in the same compartment where flammable materials, such as petrol is stored.
Product specifications are subject to change and improve without notice.
3