Table of Contents
Advertisement
10.3 Range 3
10.3.1 Access to Secure Parameters
A 5-digit code is used to control access to the secure parameters.
Security Code
English
10.3.2 Language Page
English
SET UP OUTPUTS
LOWER DISPLAY
Security Code
Enter the required code number, between 00000 and 19999, to gain access to the secure
parameters. If an incorrect value is entered, access to subsequent programming pages is
prevented and the display reverts to the Operating page.
Note. The security code is preset at '00000' to allow access during commissioning
but should be altered to a unique value, known only to authorized operators – see Section
10.3.3 Set Up Outputs Page.
Advance to Language Page.
Advance to Set Up Outputs Page.
10 PROGRAMMING...
35
Advertisement
Table of Contents
