B.7: Supported - Binary Output - Honeywell NOTIFIER BACNET-GW-3 Installation And Operation Manual

Supported - Binary Output
B.7 Supported - Binary Output
BACnet
Enumeration
0
1
2
Present Value
3
7
22
BACnet
Enumeration
0
1
2
Tracking Value
3
7
22
BACnet
Enumeration
0
Event State
1
2
BACnet
Enumeration
Reliability
0
7
BACnet
Enumeration
0
Mode
11
12
BACNET-GW-3 Installation and Operation Manual – P/N LS10014-000NF-E:C6 5/5/2017
BACnet
NFN State
LifeSafetyState
IssQuiet Normal
IssPreAlarm PreAlarm
IssAlarm Fire Alarm, Security Alarm (Life/Property), Critical
Process Alarm, (Life/Property), Medical Emergency
IssFault Security Trouble, Fire Trouble, Non-Fire Trouble, Fire
Device or Zone, Disabled, Non-Fire Device Disabled
IssActive Non-Fire Activation
IssSupervisory Supervisory (Equipment), Supervisory (Guard's Tour)
BACnet
NFN State
LifeSafetyState
IssQuiet Normal
IssPreAlarm PreAlarm
IssAlarm Fire Alarm, Security Alarm (Life/Property), Critical
Process Alarm (Life/Property), Medical Emergency
IssFault Security Trouble, Fire Trouble, Non-Fire Trouble, Fire
Device or Zone, Disabled, Non-Fire Device Disabled
IssActive Non-Fire Activation
IssSupervisory Supervisory (Equipment), Supervisory (Guard's Tour)
BACnet Event State NFN State
EsNormal Normal
EsFault Security Trouble, Fire Trouble, Non-Fire Trouble,
Fireevice Disabled, Non-Fire Device Disabled
EsOffNormal All statuses other than normal and fault.
BACnet Reliability NFN State
reNoFaultDetected All statuses other than trouble.
re_UnreliableOther Security Trouble, Fire Trouble, Non-Fire Trouble
BACnet Mode NFN State
IsmOff Power-Up State
IsmEnabled Set if point has been disabled and subsequently
enabled since startup.
IsmDisabled Fire Device or Zone Disabled, Non-Fire Device
Disabled
BACnet PIC Statement
35