Handling The Inverter; Removing The Sun2000; Packing The Sun2000; Disposing Of The Sun2000 - Huawei SUN2000 Series User Manual

SUN2000-(90KTL-100KTL) Series
User Manual

9.1 Removing the SUN2000

Before removing the SUN2000, disconnect both the AC and DC power supplies. For details
about the power-off process, see
SUN2000, wait at least 15 minutes before performing operations on it.
To remove the SUN2000, perform the following steps:
1.
2.
3.

9.2 Packing the SUN2000




9.3 Disposing of the SUN2000

If the SUN2000 service life expires, dispose of it according to the local disposal rules for
electrical equipment waste.
Disconnect all cables from the SUN2000, including RS485 communications cables, DC
input power cables, AC output power cables, and PE cables.
Remove the SUN2000 from the mounting bracket.
Remove the mounting bracket.
If the original packing materials are available, put the SUN2000 inside them and then
seal them by using adhesive tape.
If the original packing materials are not available, put the SUN2000 inside a suitable
cardboard box and seal it properly.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9

Handling the Inverter

6.3 Powering Off the
9 Handling the Inverter
System. After powering off the
78