Installing The Mounting Bracket; Support-Mounted Installation - Huawei SUN2000 Series User Manual

SUN2000-(90KTL-100KTL) Series
User Manual

4.4 Installing the Mounting Bracket

Installation Precautions
Figure 4-8
Figure 4-7 Mounting bracket dimensions
Before installing the mounting bracket, remove the security torx wrench from the mounting
bracket and save it for later use.
Figure 4-8 Removing a security torx wrench

4.4.1 Support-mounted Installation

Support-mounted Installation
Step 1 Determine the positions for drilling holes using the mounting bracket. Level the positions of
mounting holes using a bubble or digital level, and mark the positions with a marker.
shows the SUN2000 mounting bracket dimensions.
The SUN2000 mounting bracket has four groups of tapped holes, each group containing four tapped
holes. Mark any hole in each group based on site requirements and mark four holes in total. Two round
holes are preferred.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Installation
19