Installing The Batteries And Micro Sd Card; Loading Batteries - Letscom DL-2 User Manual

Installing the Batteries and Micro SD Card

Before using your camera, you need to install a set of batteries and
insert a Micro SD card. There are some important notes about both
batteries and Micro SD cards you should be aware of, so please take
the time to read the following directions and cautions:

1. LOADING BATTERIES

After opening the cover of the battery slot, you will see that the camera
has eight battery slots. A full set of four or eight batteries must be
installed for the camera to operate. Please ensure that you have
inserted batteries in the correct orientation.
We recommend using eight new alkaline AA batteries.
Note:
If you install four batteries, make sure to place them all in the first half of
the battery compartment or the second half of the battery compartment.
The four batteries are not allowed to put in the first half and second half
of the battery compartment separately.
6V 15A
Tripod Screw Nut
Bottom View
- 5 -
Micro SD Card Slot
AV Port
Micro USB Port
DC Port