Letscom DL-2 User Manual page 15

Password
Protection
Beep Sound
Format
Memory Card
Serial No.
Reset
Settings
Version
Set up a password to protect your
camera from unauthorized users.
If you forget the password, switch
the camera to the OFF mode, press
the MENU and REPLAY keys at the
On
same time, and then switch the
Off
operating mode from OFF to SETUP.
The camera is unlocked. Then you
can set the Password Protection on
and set a new password in "MENU"--
"Password Protection".
If set On, the camera will beep when
On
you press any key of the camera in
Off
the SETUP mode.
All files will be deleted after
formatting the Micro SD card. Highly
recommend you format the Micro SD
card if it has been used previously in
Yes
other devices.
No
Caution: make sure wanted files on
the Micro SD card have been
backed up before reformat or they
will be lost permanently.
Select On to assign a serial
number to each camera you have.
You can use the combination of 4
digits to record the location in the
On
photos (e.g. 1234 for Yellow Stone
Off
Park). This helps multi-camera
users identify the location when
reviewing the photos.
Select Yes to return all your
Yes
previous settings back to the
No
manufacturer default.
Defined Display the version of the camera.
- 12 -