Mounting And Positioning The Camera; Mounting - Letscom DL-2 User Manual

Mounting and Positioning the Camera

1. MOUNTING

After you've set up the camera's parameters to your personal
preferences, you're ready to take it outside and slide the power
switch to "ON". When setting up the camera for scouting game or
other outdoor applications, you must be sure to mount it in place
correctly and securely. We recommend mounting the camera on a
sturdy tree with a diameter of about 6 in. (15cm). To get the
optimal picture quality, the tree should be about 16-17 ft. (5
meters) away from the place to be monitored, with the camera
placed at a height of 2.5*3.5 ft. (0.75-1 m). Also, keep in mind that
you will get the best results at night when the subject is within the
ideal flash range, no farther than 65 ft. (20m) and no closer than
10 ft. (3 m) from the camera.
There are two ways to mount the camera: using the provided
adjustable web belt, or the tripod socket.
Using the adjustable strap: Push one end of the strap through
the two brackets on the back of the camera. Thread the end of the
strap through the buckle. Fasten the strap securely around the tree
trunk by pulling the end of the strap firmly so there is no slack left.
Using the tripod socket: The camera is equipped with a socket
at the bottom end to enable mounting on a tripod or other
mounting accessories with a standard UNC 1/4-20 thread screw.
Mounting the Camera
- 13 -