Bissell 1620 User Manual page 13

Maintenance/Storage Continued
Rinse out Tank-in-Tank and reseat the tank onto
6.
the machine.
Clean out the Flow Indicator Filter each time it is
7.
used to ensure best cleaning performance. Unscrew
the Flow Indicator cap, lift out the red Rotor and
white Filter. Rinse all three parts in tap water.
Replace the Filter and Rotor. Replace the Flow
Indicator Cap; turn until snug, do not over-tighten.
Wipe all exterior surfaces with a soft cloth.
8.
Store cleaner in a protected, dry area.
9.
When carpet is dry, vacuum again to remove
10.
hair and fuzz that the PowerLifter Plus may
have loosened.
Pump & Brush Belts Replacement
To Remove Broken Pump & Brush Belts
NOTE: Turn off machine and unplug from
wall outlet.
Step on Handle Release pedal and recline Handle
1.
on floor (see illustration).
Remove the Tank-in-Tank. Set aside (see illustration).
2.
Remove the Belt Access Door located near the
3.
ReadyTools Dial. Insert a flathead screwdriver into
the slot nearest the handle to gently pry off the
door (see illustration).
Tip:
When filling bottle or
storing unit, set
SmartMix Bottle
Dial to:
may be stored with
concentrate ready
for your next clean-
ing job. Make sure
Cap dial is turned to the
WATER ONLY
Rotor
Setting when storing
Filter
1
2
3
13