Relay Diagram And Wiring - Transmitter Solutions Reign XRE-100 Manual

3. RELAY DIAGRAM AND WIRING

1
RELAY INPUTS
Relay Inputs - The Reign XRE-100 comes with 2 relay inputs. Connect DRY closure from devices relay to be
extended. A closure on RLY1 input will result in a closure on RLY1 (NC/COM/NO) of the paired XRE-100. A
closure on RLY2/COM input will result in a closure on RLY2 (NC/COM/NO output) of the paired XRE-100.
2
RELAY OUTPUTS
Relay Outputs - The Reign XRE-100 comes with 2-relay outputs. Each output follows RELAY INPUTS from
remote paired XRE-100. When RLY1 or RLY2 INPUTS are closed RLY1 and RLY2 OUTPUTS are energized and
connect NC/COM/NO respectively. This relay state is also indicated by the GREEN ACTIVE LED above each
relay.
1 2
6
–