T R O U B L E S H O O T I N - Transmitter Solutions Reign XRE-100 Manual

TROUBLESHOOTING
XRE-100 units are not communicating:
1 - Check the Run LED. Normal operation will be orange LED flashing once a second.
2 - Press the red program button on the XRE-100. When pressed, the XRE-100 will send a radio test packet and the
RED TRANSMIT LED will illuminate. If the paired XRE-100 is online, it will acknowledge with a radio test packet –
indicated by a momentary on the green receive LED.
If you do not see the transmit and receive LED lights activate:
XRE LED GUIDE
1 - Power cycle both the XRE units.
2 - Move the XRE-100 units to a higher location and avoid mounting on/in metal objects
If you are not getting the desired range between XRE-100 units:
1 - Ensure that the both devices are powered by their own dedicated power supply
2 - Ensure that 1 amp of power draw is available to each device during transmission
3 - Move the XRE-100 units to a higher location - and avoiding mounting in/on metal objects
10