Advertisement
1. POWER DETAILS
Each side of The XRE-100 (Hub and Node) need 1 amp of current draw to transmit at full power.
IMPORTANT - XRE REQUIRES AT LEAST 1AMP POWER SUPPLY
1
POWER INPUT:
Power Input: 12 to 24 VOLTS AC/DC. Always follow polarity when DC Power is used.
2
BATTERY INPUT:
Battery Input: for 12 Volt Sealed Lead Acid (SLA) battery only.
Solid Green LED = Battery charging
Momentary Flashing LED = Battery is fully charged and a trickle/conditioning charge is occurring
1
4
2
1 AMP Minimum
Advertisement
