Replacing Fuse - Midland M Zero Plus Instruction Manual

EXT
ANT
13,8V DC
Mount in position with bolts, lock washers and nuts or self-threading screws. You
can install this transceiver in any location where 12,6 Vdc ± 10% power is available.
Insert the power cable with lighter plug into the vehicle's cigarette lighter cord.
Before operation, you must install and connect your antenna system. The lead from
the antenna you've installed should be connected to the antenna coaxial connector.
If you are using an external speaker, connect it to the EXT-SPKR jack.

REPLACING FUSE

If you replace the fuse for DC Power Cord, use 2 A type (one is supplied as spare).
Hold the fuse holder and press on the inside, then rotate the holder.
CONNECTING THE MICROPHONE
Your transceiver has a new microphone connector. This ensures that you won't acci-
dentally pull out or loosen the plug connection when moving the microphone cable
out.
6 | M Zero Plus Instruction Guide