Maintenance, Storage And; Transport - Canon Selphy CP520 Printing Manual

This section explains how to maintain, store and transport the printer.
Internal Care
If fine stripes appear on printed images,
there is a possibility that dirt or dust has
become lodged inside the printer. Use
the supplied cleaner to remove the dirt
or dust.
1. Remove the ink cassette.
2. Insert the cleaner with the arrow side upward
all the way into the slot, then remove it,
repeating this two or three times.
Exterior Care
Wipe the exterior with a soft, dry cloth.
Never apply solvents, such as benzine or thinners, or detergent to the printer.
These substances may damage the exterior or peel the finish.
Care of the Back
Clean any dust from the air vents on the back. Dust will get on the ink
sheet if it enters from the air vents, preventing the printer from printing
cleanly. If dust becomes lodged on the ink sheet, use a blower brush to
remove it so that you do not touch the ink sheet.
Storage
•Detach the power cord of the compact power adapter and from the
power outlet.
•Remove the paper and ink cassettes from the printer for storage. Store
the paper cassettes with the lids closed. Remove the sheets of paper,
place them into their bag and replace them in their box, storing them
flat.
Store the ink cassette in a bag so that dust does not get on it.
•Store the printer flat so that dust does not enter into it.

Transport

•Remove the paper and ink cassettes and close the covers.
•Transport the printer wrapped in a soft cloth to avoid scratching it. Dust
entering the printer may prevent it from printing cleanly.

Maintenance, Storage and

Transport
Slide the cleaner in
and out 2 or 3 times.
If you must store it
vertically, please orient it
in this position.
9