Table of Contents
Advertisement
Replacing the wiper blade, rear
window
The wiper blades sweep water away from the
windscreen and rear window. Together with
washer fluid, they aim to clean the windows
and ensure visibility while driving. Wind-
screen and rear window wiper blades can be
replaced.
Replacing the wiper blade, rear
window
Lift the wiper arm from the window and pull the
lower section of the blade to the right.
Grip the centre of the wiper arm and lift it
from the windscreen to lock position.
NOTE
There is a lock position at half extension
angle that may feel like resistance, this lock
prevents the arm from falling back against
the windscreen. The wiper arm must be
pulled past the lock for wiper blade
replacement.
Grip the lower part of the blade and pull to
the right until the blade loosens from the
arm.
MAINTENANCE AND SERVICE
3. Press the new wiper blade into place. You
should hear a click. Check that it is firmly
installed.
4. Lower the wiper arm.
IMPORTANT
Check the blades regularly. Neglected
maintenance shortens the service life of
the wiper blades.
Related information
Using the rain sensor (p. 176)
•
Using windscreen and headlamp washers
•
(p. 177)
Using automatic rear windscreen wiping
•
when reversing (p. 179)
Using the rain sensor's memory function
•
(p. 177)
Using the rear window wiper and washer
•
(p. 178)
Filling washer fluid (p. 676)
•
Set the wiper blades in service position
•
(p. 675)
Replacing windscreen wiper blades
•
(p. 674)
Using windscreen wipers (p. 175)
•
Wiper blades and washer fluid (p. 174)
•
673
Advertisement
Table of Contents
