Reset; Freeze; Pulse; Edit Functions - Qu-Bit Electronix Nebulae Manual Manual

14. Reset

Resets the playback position to the currently selected loop start point.

15. Freeze

Pauses the current playback position while retaining the frequency and spectral characteristics of the audio.
This is a latching control.
The Button LED will be illuminated when the buffer is frozen.

16. Pulse

A 5V gate emits from this output whenever the loop resets.

Edit Functions

These commands are executed when holding the File button and pressing another button.

Reload Files

Reload files by holding File and pressing Source. (Note: Source is a falling edge sensitive button) .
Reload files from a USB drive and restart the currently selected instrument file.

Buffer Erase

Erase the buffer by holding file and pressing reset.
Upon erasing the buffer the reset LED will blink five times to indicate that the buffer has been cleared.

Secondary

A secondary set of controls is accessible when holding down the source button.
Once the source button has been held for 250 ms, the LEDs will shift to display the state of the secondary settings.
With source pressed down, pressing any of the other buttons or turning the knobs will affect the secondary controls.
Releasing the source button returns the controls back to their primary functions.
CV and gate inputs will continue to affect the primary controls even while source is being held .
13